What Is The Commercial Flower Dehydrator

Views: 3     Author: Site Editor     Publish Time: 2021-09-01      Origin: Site

YKP commercial flower dehydrator set dehumidification, heating, refrigeration, exhaust temperature, ventilation as a whole, higher than the traditional drying efficiency, more environmental protection than coal burning fuel, more energy saving than electric heating drying.

Eleanor honeysuckle commercial flower dehydrator has long service life, safe and reliable operation, high efficiency and energy saving, convenient installation, environmental protection and no pollution, wide application range, and the drying process does not need special care.

The honeysuckle drying machine produced by the air heat pump honeysuckle dryer has good appearance, good color, green environmental protection and no pollution. It is suitable for large quantities of rapid drying, saving trouble and time and labor. It takes up a small area of the site and is not restricted by weather.Oven is equipped with automatic temperature control system, temperature control precision.Commercial flower dehydrator drying room is equipped with an adjustable air plate, and the temperature in the box is uniform.Adopt low noise and energy saving built-in circulating fan, which runs in balance and greatly reduces the noise and heat loss of the equipment. The air inlet is equipped with air filter and standard moisture discharge device. 

Drying lady enforcers purpose:

The nutrient content of dry products of Bahuang flower per 100g: water 9.570g, protein 1.812g, crude fiber 2.785g, ash 1.547g, calcium 961.27mg, phosphorus 328.45mg.It also contains at least 13 amino acids.It also contains elements such as Cu, N, Cr, Cd, Ca and Zn, which play an important role in human body. Therefore, Farewell flower has high edible value.

Drying room material:

We use 100mm polyurethane, which has excellent heat preservation effect and can be suitable for drying various materials. It is made of colored steel and stainless steel and can be customized.

Commercial flower dehydrator

Commercial flower dehydrator is a continuous flow drying equipment, suitable for the drying of good air permeability sheet, strip, granular materials, especially for dehydrated vegetables, Chinese medicine pieces and other materials with high moisture content and temperature is not allowed to be too high;This series of dryer has the advantages of fast drying speed, high evaporation intensity and good product quality.Paste materials such as filter cake can also be granulated and dried or made into rod shape.

  

Lady enforcers drying processing


Commercial flower dehydrator


Dried flower manufacturing process


Initial drying stage:

The picked and sorted farewell flowers are evenly placed on the material frame. The initial drying room temperature should be raised to 55°C, and the flowers can be pushed into the drying room.The dry bulb setting is set to 55°C and the wet bulb setting to 38 °C, and the room temperature is kept for 4-6 hours, after which the softening period begins.

 

The second stage drying temperature and humidity setting:

The temperature of the drying room (Farewell flower dryer) gradually increased from 55to 60for dry balls and from 38to 42for wet balls.

The increase time of the temperature difference is controlled within 2 hours and should not exceed the temperature range of 60.

Farewell flower after 9-12 hours of initial, moderate drying and strong humidity discharge basically reached 70% dry.

 

The third stage drying temperature and humidity setting:

The bulb temperature is controlled for 4-6 hours by the heating stage of 55-60. In this stage, the wet bulb temperature is set at 46to facilitate the temperature increase. After the third stage, the pitaya flower basically reaches 80% dry.

 

The fourth stage of drying is completed:

The temperature range is set to 75for dry bulb and 50for wet bulb, which is the forced drying period. The temperature shall not exceed 80. After 2-4 hours of forced drying, the water content of Farewell flower is about 12%.The advantage of heat pump dryer lies in the intelligent temperature control and automatic humidity.On average, the disposal cost of dried flowers is about 50 yuan per jin.

 

Pay attention:The drying time is generally 18-20 hours, the longest can reach more than 30 hours, which is related to the thickness of the spread in the drying plate and the amount of water contained in The Farewell flower. The farewell flower is also different because of different varieties.After the test, if the whole flower is not cut, the drying time is more than 48 hours;The drying time for multiple slices is shortened to about 24 hours.The drying time of pitaya flower harvested in rain period is about 10-20% more than that in non-rain period

 

After the sales:

One year warranty, within one year after purchase, if there is any problem with the Commercial flower dehydrator, the engineer can repair the machine through video guidance. If the parts are damaged, the seller can provide replacement parts for free, and the buyer will pay the freight. After the warranty period, if there is a failure of the machine, the engineer can still repair the machine through video guidance. If the parts are damaged, the seller can provide replacement parts at the factory price, and the buyer will pay the freight. In short, is one year warranty, lifetime maintenance, customers at any time there is any problem can directly contact the engineer to solve the problem.

 

Contact us

Sale manager:Alan

ykpdryer1@163.com

WhatsApp number:+86 18022349870

Wechat number:+86 18022349870

Add: Bldg 101, No.11-2, Songzhuang Road, Xinhua Street, Huadu District, Guangzho

PRODUCT CATEGORY

Guangzhou Yike Heat Pump Drying Equipment Technology Co.,Ltd.

QUICK LINKS

PRODUCTS CATEGORY

CONTACT US

   Add : 11 Songzhuang Road, Xinhua Street, Huadu District, Guangzhou City, Guangdong Province
    Phone : 86-18022346760
    E-mail : ykpdryer@vip.163.com
   Skype : Sunshine123
    Website : https://ykpdryer.en.alibaba.com/ 
Copyright  2021Guangzhou Yike Heat Pump Drying Equipment Technology Co.,Ltd. Sitemap